| CONVERT YOUR ROTAX 912 TO THE 95 HORSEPOWER |
FEEL THE SURGE OF ANOTHER 15 HORSEPOWER!
Below are the first four pages of the 912
XTRA upgrade kit instruction manual. |
|
1. Drain coolant 2. Remove the two allen head bolts on the top of each head that hold the water hose manifold, being careful not to lose or damage the "O" rings that are between the manifold and the head. The water hoses on the bottom of the heads are removed by loosening the hose clamp and slipping the hose off of the nipple. 3.
Remove the four allen head bolts that secure the intake manifold to the heads,
leaving the cables, fuel lines and carberators attached to the intake and be careful of
the "O" rings that are between the manifold and the head. |
![]()
6. Disconnect any exhaust gas temperature or cylinder head
temperature probes and wires. |
||
![]() 7. Remove the four bolts that hold the head and cylinder in place. Carefully rock the head back and forth while pulling and the head will come loose and slide off of the mounting studs. Leave the rockers and pushrods in place. |
|
GET THE COMPLETE 912 XTRA UPGRADE KIT |
FOR ACCESS THE COMPLETE 912 XTRA UPGRADE INSTRUCTION MANUAL,
WHERE YOU FOR ORDER INFORMATION CALL (703)
652-9480 |